Composants «warm edge» pour une performance thermique améliorée!
Dernière mise à jour le 14 avril 2020 à 15 h 47 min
Composants «warm edge» pour une performance thermique améliorée!
Dernière mise à jour le 14 avril 2020 à 15 h 47 min
Du site de technoform.com (en français) :
Composants «warm edge» pour une performance thermique améliorée
Une performance et une efficacité thermique améliorée dans un vitrage isolant peuvent contribuer aux économies d’énergie et à réduire considérablement les émissions de CO₂. Les intercalaires « warm edge » optimisés thermiquement séparent les deux parois de verre et minimisent le flux de chaleur passant à travers les matériaux sur le bord du vitrage. En créant une rupture de pont thermique dans le système, nos intercalaires créent l’isolation nécessaire contre la chaleur ou contre le froid.
Notre expertise comprend le développement et la fabrication de solutions localisées sur le bord du vitrage en matériaux composites hybrides optimisés thermiquement et des composants spécifiques conçus pour répondre aux exigences d’une variété de clients et de marchés. L’intercalaire TGI M extrêmement innovant, par exemple, a été conçu pour répondre aux nombreuses exigences des vitrages modernes et est disponible dans différentes variantes spécialement adaptées à leurs utilisations prévues.
Intercalaire TGI-M
- Possède la résistance requise à la compression nécessaire à l’assemblage des vitrages et facilite la manipulation
- Fournit une durabilité exceptionnelle pour la vie du vitrage isolant.
- Une finition esthétique à l’aspect mat et une large variété de couleurs pour s’accorder au vitrage ou au coloris du cadre de fenêtre
- Améliore l’efficacité thermique afin de répondre à ou de dépasser les exigences énergétiques
- Disponible dans une large variété de largeurs
- Disponible avec ou sans renfort métallique selon le besoin d’application – veuillez nous contacter pour plus d’informations, nous sommes toujours heureux de vous conseiller
Insulating glass performance at its best
When it comes to building sustainably, high energy efficiency, durability, and indoor climate are key factors. To achieve this, thermally optimized edge bond solutions for insulating glass are what it takes. With our warm edge spacers between the glass panes, the TGI-Spacer M and the TGI-Spacer Precision, Technoform improves the thermal performance of the edge bond and thus guarantees gas tightness at a peak level. The effects are not only minimized energy losses. There is also a visible reduction in condensation which forms at the edge of the window and thereby prevents the formation of mold. A warm edge spacer significantly reduces the circulation of air near the window which gives you better life quality inside your home.
To offer a perfect fitting of our Spacers into every frame we also set new standards in surface quality and match the highest requirements of architects and building designers.
Contact us if you want to increase the quality and durability of your window, door, and facade systems through an optimized glass edge bond. As a sideline our products help to save approximately 1.5 million kWh of energy each year, which means a significant reduction of the global level of CO2 emissions.
TGI-Spacer M
The TGI-Spacer M is a bendable warm edge spacer bar. It was designed to meet the numerous requirements which apply to the modern glass edge bond. It is available in a range of variants such as with wire and without wire, specially matched to their individual intended use. While some of the details of the designs may differ from each other, they all provide low Psi values, high productivity, high process reliability and high-quality appearance. The TGI-Spacer M complies to the requirements of EN 1279-2, 3 & 6, DTA and ASTM. It is a certified Passive House Component Class B for Cold Climate.
TGI-Spacer M with wire (ww)
- Warm edge spacer
- Bendable spacer (also suitable for cutting and corner keys)
- High profile stability due to patented steel wires
- Ideal for medium to large frames
- No readjustment of the frame
- Rigid corners
TGI-Spacer M without wire (nw)
- Warm edge spacer
- Bendable spacer (also suitable for cutting and corner keys)
- High level of design flexibility in any form
- Enables the bending of the smallest radii
- Allows negative bending (e.g. for continuous ventilation pipes)
Aussi du site de technoform.com (document pdf – anglais) :
Page d’accueil du site de technoform.com ;
Page de référence sur le produit, du site de technoform.com :